I recently added the W2 to monitor the power output at M0PCB on HF and
VHF with the K3 and amplifiers. For this it is great, I particularly
like the speed at which it reacts to the output power.
I am in the process of adding an external transverter so i can make use
of my K3 and P3 on the 70MHz band, and that got me thinking about the W2.
1) I know the DCHF-200a is specified to 54MHz but how would the unit
perform up to 70.5MHz?
2) As I already have the DC2000a and DCV/U-200a sensors attached is
there an easy way to add a third sensor to the set-up? I realise I could
add another W2 to the shack but that seems overkill and I can certainly
more easily justify a 3rd sensor above a 2nd W2 at the present time.
Will try to look out for any responses to the list, but I use the daily
digest and am prone to skim reading ;-)
Many thanks for any input, and thanks to Elecraft for a great radio.