Help with a K3 Macro

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Help with a K3 Macro

KC6CNN
I am trying to create a Macro for my K3.
It is to keep me from having to lean up and hit buttons. Man that makes me sound so lazy.

I am trying to get the Text Dec THR screen to come up and change the value and then go away.
I can get the screen to come up and even get it to go back to the normal screen on the K3.
But I cant get it to change the THR value.
I am looking to have it change from 2 to 3 to 4 and 5.
Can anyone help me with this?
Here is what I have so far.
SWH40 to have the CWT held which brings up the THR screen. Then the Same SWH40 at the end to make it go away.
Now how do I change the value?
Any help would be appreciated, and my radio desk is very wide, like 4 feet so radio sits at the back and I sit up front so now you understand the leaning. hihi

Thanks
Gerald - KC6CNN
KC6CNN - Gerald
K3 # 6294
KX3 # 757
Reply | Threaded
Open this post in threaded view
|

Re: Help with a K3 Macro

tomb18


Sent from BlueMail



On Nov 7, 2015, 11:03 PM, at 11:03 PM, KC6CNN <[hidden email]> wrote:

>I am trying to create a Macro for my K3.
>It is to keep me from having to lean up and hit buttons. Man that makes
>me
>sound so lazy.
>
>I am trying to get the Text Dec THR screen to come up and change the
>value
>and then go away.
>I can get the screen to come up and even get it to go back to the
>normal
>screen on the K3.
>But I cant get it to change the THR value.
>I am looking to have it change from 2 to 3 to 4 and 5.
>Can anyone help me with this?
>Here is what I have so far.
>SWH40 to have the CWT held which brings up the THR screen. Then the
>Same
>SWH40 at the end to make it go away.
>Now how do I change the value?
>Any help would be appreciated, and my radio desk is very wide, like 4
>feet
>so radio sits at the back and I sit up front so now you understand the
>leaning. hihi
>
>Thanks
>Gerald - KC6CNN
>
>
>
>
>-----
>KC6CNN - Gerald
>K2 # 5486
>K3 # 6294
>KX3 # 757
>--
>View this message in context:
>http://elecraft.365791.n2.nabble.com/Help-with-a-K3-Macro-tp7610111.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Help with a K3 Macro

tomb18
Hi
Once you see the THR screen, issuing an UP or DN or UPB on DNB should do the trick except that it wasn't in the firmware the last I checked. However Wayne did add some firmware commands recently. I'm not sure if these were added. They were to my knowledge, 4 out of 5 missing commands in the whole k3 command set.
73 Tom
va2fsq.com

Sent from BlueMail



On Nov 8, 2015, 12:27 AM, at 12:27 AM, Tom <[hidden email]> wrote:

>
>
>Sent from BlueMail
>
>
>
>On Nov 7, 2015, 11:03 PM, at 11:03 PM, KC6CNN <[hidden email]> wrote:
>>I am trying to create a Macro for my K3.
>>It is to keep me from having to lean up and hit buttons. Man that
>makes
>>me
>>sound so lazy.
>>
>>I am trying to get the Text Dec THR screen to come up and change the
>>value
>>and then go away.
>>I can get the screen to come up and even get it to go back to the
>>normal
>>screen on the K3.
>>But I cant get it to change the THR value.
>>I am looking to have it change from 2 to 3 to 4 and 5.
>>Can anyone help me with this?
>>Here is what I have so far.
>>SWH40 to have the CWT held which brings up the THR screen. Then the
>>Same
>>SWH40 at the end to make it go away.
>>Now how do I change the value?
>>Any help would be appreciated, and my radio desk is very wide, like 4
>>feet
>>so radio sits at the back and I sit up front so now you understand the
>>leaning. hihi
>>
>>Thanks
>>Gerald - KC6CNN
>>
>>
>>
>>
>>-----
>>KC6CNN - Gerald
>>K2 # 5486
>>K3 # 6294
>>KX3 # 757
>>--
>>View this message in context:
>>http://elecraft.365791.n2.nabble.com/Help-with-a-K3-Macro-tp7610111.html
>>Sent from the Elecraft mailing list archive at Nabble.com.
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:[hidden email]
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>>Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]