The problem Gene, is that you posted your question through the archive at
Nabble, instead of to the main reflector. Nabble never passed your message
on to the reflector, so no one saw the question. If you look at your post on
Nabble, you will see: "This post has NOT been accepted by the mailing list
yet." Hence, no one responded to the question. -Bruce, N1RX
For the sake of expedience, here's gene's original posting:
My K2/100 that I bought a few months back, already assembled, has a few
issues. First is the ALC does not cut back the output power to the knob
power setting on SSB. I belieive there is a resistor mod for this. Anyone
have experience with this mod? Please advise me. Also, the TUNE power is a
steady 40W into a reliable Wattmeter, it should be 20W, correct? Can I
adjust this TUNE power setting with R26, per Elecraft 100W amplifier manual?
If so, please advise me as to what I need to do. Thanks, Gene
Please repeat the original question - I have not seen it, your original
post was blank.
If you are posting through Nabble, make certain you are not posting in
HTML - I only read the Elecraft reflector direct.