K3 Buffered output.

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 Buffered output.

Clive Lorton
Hi,
Is the IF output (which I believe is already buffered) on my K3 sn 8K+
suitable to use with a Softrock or should I use an external amp.
Many thanks Clive G8POC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K3 Buffered output.

Don Wilhelm-4
Clive,

The K3 IF output is indeed buffered.
However, you may need a preamp in front of the Softrock which will also
provide reduced chance that the Softrock oscillator will be fed back
into the K3 IF.

73,
Don W3FPR

On 12/9/2014 8:53 AM, Clive Lorton wrote:
> Hi,
> Is the IF output (which I believe is already buffered) on my K3 sn 8K+
> suitable to use with a Softrock or should I use an external amp.
> Many thanks Clive G8POC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]