K3 filter in data wont go to 0.05 width

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 filter in data wont go to 0.05 width

KD8NNU
Dear Group,

I am unable to get my K3 in DATA-A or DATA-R to allow the DSP filter to
go tighter than .15 khz.  But it does go to 0.05 in CW.

Per the guys at Elecraft I should be able to tighten it up to that
level.   However, I am guessing that I have something set wrong
elsewhere.

I am also coupled to HRD and DM780 if that makes any difference at all.
It makes no difference if HRD is on or off.

I have also verified that I am at the current release level of software.

So I need some help in finding what bit I put in the wrong place.

Don
KD8NNU


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 filter in data wont go to 0.05 width

K8AC
This post has NOT been accepted by the mailing list yet.
Same here with #5053.  Latest firmware installed, none of the software you mentioned.

73, Floyd - K8AC