K3S low output power on 160m

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

K3S low output power on 160m


I just notice that my k3s with the latest firmware transmits only about 60W on 160W.

I made just a couple of qsos on 160, but I am more than sure that the ouput power was OK at about 100-110W.

I just made tx power calibration, did not help.

On all other bands the max power is 110W.

I do the measurement using dummy load + external watmeter.

Any suggestions?