KPA1500

classic Classic list List threaded Threaded
40 messages Options
12
Reply | Threaded
Open this post in threaded view
|

KPA1500

Petr, OK1RP/M0SIS
Hi all,

I am so sorry to bother you over here.
Is there any rumour about the fat brother of KPA500... something like KPA1500 or so, please?

best regards,
73 - Petr, OK1RP
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

N5GE
On Thu, 18 Feb 2016 10:38:03 -0700 (MST), you wrote:

No.

>Hi all,
>
>I am so sorry to bother you over here.
>Is there any rumour about the fat brother of KPA500... something like
>KPA1500 or so, please?
>
>best regards,
>73 - Petr, OK1RP
>
>
>
>
>-----
>http://ok1rp.blogspot.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Amateur Radio Operator N5GE
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Ken K6MR
In reply to this post by Petr, OK1RP/M0SIS
No rumors. Best we can do is photos of the original prototype.

http://www.n6ie.com/Elecraft.html

Maybe someday…

Ken K6MR

From: Petr, OK1RP/M0SIS<mailto:[hidden email]>
Sent: Thursday, February 18, 2016 09:39
To: [hidden email]<mailto:[hidden email]>
Subject: [Elecraft] KPA1500

Hi all,

I am so sorry to bother you over here.
Is there any rumour about the fat brother of KPA500... something like
KPA1500 or so, please?

best regards,
73 - Petr, OK1RP




-----
http://ok1rp.blogspot.com
--
View this message in context: http://elecraft.365791.n2.nabble.com/KPA1500-tp7614288.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Clay Autery
REALLY would like one of those in the 1500 trim...  Maybe a "Limited
Edition".  I'd rather have an Elecraft HP PA, than any other maker...
and the bit about the substantial overhead gets me wanting to write a check!

IF y'all make them, I am FIRST on the list of pre-orders.  :-)

______________________
Clay Autery, KG5LKV
(318) 518-1389

On 2/18/2016 2:47 PM, Ken K6MR wrote:

> No rumors. Best we can do is photos of the original prototype.
>
> http://www.n6ie.com/Elecraft.html
>
> Maybe someday…
>
> Ken K6MR
>
> From: Petr, OK1RP/M0SIS<mailto:[hidden email]>
> Sent: Thursday, February 18, 2016 09:39
> To: [hidden email]<mailto:[hidden email]>
> Subject: [Elecraft] KPA1500
>
> Hi all,
>
> I am so sorry to bother you over here.
> Is there any rumour about the fat brother of KPA500... something like
> KPA1500 or so, please?
>
> best regards,
> 73 - Petr, OK1RP
>
>
>
>
> -----
> http://ok1rp.blogspot.com
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA1500-tp7614288.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Jim AB3CV
On Thu, Feb 18, 2016 at 7:14 PM, Clay Autery <[hidden email]> wrote:

> IF y'all make them, I am FIRST on the list of pre-orders.  :-)
>


Ahem, no cuts in line. It starts back there...

:-)

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Steve-2
In reply to this post by Petr, OK1RP/M0SIS
In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall was a 1.5kw solid state amp - perhaps as much as 2kw?  Anyway they were running it key down into a dummy load at the FDIM hotel (I think it dimmed the lights on the floor).  While it did not look like a prototype, it evidently was a “proof of concept”.  I thought they were seeking FCC approval at the time… but nothing seen since then.

73,
Steve
aa8af

> On Feb 18, 2016, at 12:38 PM, Petr, OK1RP/M0SIS  wrote:
>
> Hi all,
>
> I am so sorry to bother you over here.
> Is there any rumour about the fat brother of KPA500... something like
> KPA1500 or so, please?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Tony Scandurra K4QE
You can see pictures here:

http://www.n6ie.com/Elecraft.html

73, Tony K4QE

On Thu, Feb 18, 2016 at 8:18 PM, Steve <[hidden email]> wrote:

> In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall
> was a 1.5kw solid state amp - perhaps as much as 2kw?  Anyway they were
> running it key down into a dummy load at the FDIM hotel (I think it dimmed
> the lights on the floor).  While it did not look like a prototype, it
> evidently was a “proof of concept”.  I thought they were seeking FCC
> approval at the time… but nothing seen since then.
>
> 73,
> Steve
> aa8af
>
> > On Feb 18, 2016, at 12:38 PM, Petr, OK1RP/M0SIS  wrote:
> >
> > Hi all,
> >
> > I am so sorry to bother you over here.
> > Is there any rumour about the fat brother of KPA500... something like
> > KPA1500 or so, please?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Gary Gregory-2
In reply to this post by Steve-2
And shelved. Not about to see the light of day anytime soon.
😊
Gary

-----Original Message-----
From: "Steve" <[hidden email]>
Sent: ‎19/‎02/‎2016 11:18 AM
To: "Petr, OK1RP/M0SIS" <[hidden email]>
Cc: "[hidden email]" <[hidden email]>
Subject: Re: [Elecraft] KPA1500

In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall was a 1.5kw solid state amp - perhaps as much as 2kw?  Anyway they were running it key down into a dummy load at the FDIM hotel (I think it dimmed the lights on the floor).  While it did not look like a prototype, it evidently was a “proof of concept”.  I thought they were seeking FCC approval at the time… but nothing seen since then.

73,
Steve
aa8af

> On Feb 18, 2016, at 12:38 PM, Petr, OK1RP/M0SIS  wrote:
>
> Hi all,
>
> I am so sorry to bother you over here.
> Is there any rumour about the fat brother of KPA500... something like
> KPA1500 or so, please?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Clay Autery
If there were 600 folks willing to pony up the cash to pre-order, I'll
bet they might consider dusting that shelf off and pulling it down for
some production planning.

I'd do it...  only 599 to go.  <wink>

______________________
Clay Autery, KG5LKV
(318) 518-1389

On 2/18/2016 7:31 PM, Gary wrote:

> And shelved. Not about to see the light of day anytime soon.
> 😊
> Gary
>
> -----Original Message-----
> From: "Steve" <[hidden email]>
> Sent: ‎19/‎02/‎2016 11:18 AM
> To: "Petr, OK1RP/M0SIS" <[hidden email]>
> Cc: "[hidden email]" <[hidden email]>
> Subject: Re: [Elecraft] KPA1500
>
> In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall was a 1.5kw solid state amp - perhaps as much as 2kw?  Anyway they were running it key down into a dummy load at the FDIM hotel (I think it dimmed the lights on the floor).  While it did not look like a prototype, it evidently was a “proof of concept”.  I thought they were seeking FCC approval at the time… but nothing seen since then.
>
> 73,
> Steve
> aa8af
>
>> On Feb 18, 2016, at 12:38 PM, Petr, OK1RP/M0SIS  wrote:
>>
>> Hi all,
>>
>> I am so sorry to bother you over here.
>> Is there any rumour about the fat brother of KPA500... something like
>> KPA1500 or so, please?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Michael Cozzi

     Well, I really dislike fanboism. But the Elecraft equipment I own
is outstanding.

     So I'm two.

     598....

     Michael KD8TUT

On 2/18/2016 9:29 PM, Clay Autery wrote:

> If there were 600 folks willing to pony up the cash to pre-order, I'll
> bet they might consider dusting that shelf off and pulling it down for
> some production planning.
>
> I'd do it...  only 599 to go.  <wink>
>
> ______________________
> Clay Autery, KG5LKV
> (318) 518-1389
>
> On 2/18/2016 7:31 PM, Gary wrote:
>> And shelved. Not about to see the light of day anytime soon.
>> 😊
>> Gary
>>
>> -----Original Message-----
>> From: "Steve" <[hidden email]>
>> Sent: ‎19/‎02/‎2016 11:18 AM
>> To: "Petr, OK1RP/M0SIS" <[hidden email]>
>> Cc: "[hidden email]" <[hidden email]>
>> Subject: Re: [Elecraft] KPA1500
>>
>> In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall was a 1.5kw solid state amp - perhaps as much as 2kw?  Anyway they were running it key down into a dummy load at the FDIM hotel (I think it dimmed the lights on the floor).  While it did not look like a prototype, it evidently was a “proof of concept”.  I thought they were seeking FCC approval at the time… but nothing seen since then.
>>
>> 73,
>> Steve
>> aa8af
>>
>>> On Feb 18, 2016, at 12:38 PM, Petr, OK1RP/M0SIS  wrote:
>>>
>>> Hi all,
>>>
>>> I am so sorry to bother you over here.
>>> Is there any rumour about the fat brother of KPA500... something like
>>> KPA1500 or so, please?
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Scott Manthe-2
In reply to this post by Clay Autery
At more than $6000 per unit (in 2006 dollars), I'm not sure 600 people
would pony up the cash. I saw the both KPA800 and KPA1500 at Dayton and
that's the closest I've come to actually drooling over a piece of
amateur gear. The KPA1500 TXed 1800 watts into a dummy load for the
entire hamfest. I'd love to have one. It'd be fun to know who has the
demo units, I could come up with a Harley to trade... :)

73,
Scott N9AA


On 2/18/16 9:29 PM, Clay Autery wrote:

> If there were 600 folks willing to pony up the cash to pre-order, I'll
> bet they might consider dusting that shelf off and pulling it down for
> some production planning.
>
> I'd do it...  only 599 to go.  <wink>
>
> ______________________
> Clay Autery, KG5LKV
> (318) 518-1389
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Clay Autery
One amp to rule then all... I'd sell blood, body parts and my mountain
bike to have one...

And in response to the other guy...  not a fanboi...  just appreciate
nice stuff.

______________________
Clay Autery, KG5LKV
(318) 518-1389

On 2/18/2016 9:52 PM, Scott Manthe wrote:

> At more than $6000 per unit (in 2006 dollars), I'm not sure 600 people
> would pony up the cash. I saw the both KPA800 and KPA1500 at Dayton
> and that's the closest I've come to actually drooling over a piece of
> amateur gear. The KPA1500 TXed 1800 watts into a dummy load for the
> entire hamfest. I'd love to have one. It'd be fun to know who has the
> demo units, I could come up with a Harley to trade... :)
>
> 73,
> Scott N9AA
>
>
> On 2/18/16 9:29 PM, Clay Autery wrote:
>> If there were 600 folks willing to pony up the cash to pre-order, I'll
>> bet they might consider dusting that shelf off and pulling it down for
>> some production planning.
>>
>> I'd do it...  only 599 to go.  <wink>
>>
>> ______________________
>> Clay Autery, KG5LKV
>> (318) 518-1389
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Alan Bloom
> On 2/18/2016 9:52 PM, Scott Manthe wrote:
>> At more than $6000 per unit (in 2006 dollars), I'm not sure 600 people
>> would pony up the cash.

That's only $4 per watt, not too bad.  The KXPA100-F is twice that!  :=)

Alan N1AL


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Petr, OK1RP/M0SIS
This post was updated on .
In reply to this post by Michael Cozzi
OK guys, the cards are dealt.
I am going to check what I could sell...:)

597... to go only

73 - Petr, OK1RP
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Victor Rosenthal 4X6GP
Petr,

Don't sell anything right away. Elecraft has never given any indication
that they are interested in producing an amplifier bigger than the
KPA500. And the prototypes are 8 or 9 years old, if I remember
correctly, and they would have to change a lot in order to manufacture them.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 19 Feb 2016 10:45, Petr, OK1RP/M0SIS wrote:
> OK guys, the cards are dealt.
> I am going to check what I can sell...:)
> 597...to go only
> 73 - Petr, OK1RP
>
>
>
> -----
> http://ok1rp.blogspot.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Victor Rosenthal 4X6GP
Don't know what I was thinking -- not 8 or 9 years. But a long enough
time that my comment is still correct.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 19 Feb 2016 12:06, Vic Rosenthal 4X6GP/K2VCO wrote:

> Petr,
>
> Don't sell anything right away. Elecraft has never given any indication
> that they are interested in producing an amplifier bigger than the
> KPA500. And the prototypes are 8 or 9 years old, if I remember
> correctly, and they would have to change a lot in order to manufacture
> them.
>
> 73,
> Vic, 4X6GP/K2VCO
> Rehovot, Israel
> http://www.qsl.net/k2vco/
>
> On 19 Feb 2016 10:45, Petr, OK1RP/M0SIS wrote:
>> OK guys, the cards are dealt.
>> I am going to check what I can sell...:)
>> 597...to go only
>> 73 - Petr, OK1RP
>>
>>
>>
>> -----
>> http://ok1rp.blogspot.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

John Fritze
In reply to this post by Petr, OK1RP/M0SIS
596....

--
John Fritze Jr
K2QY
[hidden email]
ACACES president 2014
ARES ENY DEC Northern District
Hudson Div. Asst. Director
Twitter: @k2qy
401 261 4996 (cell)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Clay Autery
In reply to this post by Victor Rosenthal 4X6GP
Shhhhh...  We're starting a ground-swell...  <grin>

______________________
Clay Autery, KG5LKV
KPA1500 Pre-Order #1
(318) 518-1389

On 2/19/2016 4:06 AM, Vic Rosenthal 4X6GP/K2VCO wrote:

> Petr,
>
> Don't sell anything right away. Elecraft has never given any
> indication that they are interested in producing an amplifier bigger
> than the KPA500. And the prototypes are 8 or 9 years old, if I
> remember correctly, and they would have to change a lot in order to
> manufacture them.
>
> 73,
> Vic, 4X6GP/K2VCO
> Rehovot, Israel
> http://www.qsl.net/k2vco/
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

Gary Gregory-2
Well the management have stated they will not be doing it so I guess you are going to need a looong list
😊

-----Original Message-----
From: "Clay Autery" <[hidden email]>
Sent: ‎20/‎02/‎2016 1:01 AM
To: "[hidden email]" <[hidden email]>
Subject: Re: [Elecraft] KPA1500

Shhhhh...  We're starting a ground-swell...  <grin>

______________________
Clay Autery, KG5LKV
KPA1500 Pre-Order #1
(318) 518-1389

On 2/19/2016 4:06 AM, Vic Rosenthal 4X6GP/K2VCO wrote:

> Petr,
>
> Don't sell anything right away. Elecraft has never given any
> indication that they are interested in producing an amplifier bigger
> than the KPA500. And the prototypes are 8 or 9 years old, if I
> remember correctly, and they would have to change a lot in order to
> manufacture them.
>
> 73,
> Vic, 4X6GP/K2VCO
> Rehovot, Israel
> http://www.qsl.net/k2vco/
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: KPA1500

john@kk9a.com
In reply to this post by Petr, OK1RP/M0SIS
While a KPA-1500 or even a KPA-750 would be nice, Elecraft obviously has
their reasons for not manufacturing it. Perhaps well designed high power
SS amps are just too costly. Acom announced the 1200S last year and I have
yet to see one at a US dealer.

John KK9A

From Gary vk1zzgary
Fri Feb 19 10:07:10 EST 2016

Well the management have stated they will not be doing it so I guess you
are going to need a looong list

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
12