Hi Group,
Quick question on the KXPA100. I have a brand new factory built unit with antenna tuner that seems to have a possible antenna switching problem. When I press and hold the Tune (ANT) button, the amp typically sounds as if a relay is chattering and the LED under 25 flashes. Almost like it doesn't recognize the switch command and attempts to go into the tune mode. Regardless of what it is doing, the antenna switching does not take place. I've also tried to switch using the KXPA utility and it will not make the switch either when the amp is acting like this. Now sometimes the switching will all function correctly from the button or utility.
Anyone else experience similar issues when attempting to switch between antenna 1 and 2?
Thanks!
Chad
N0YK
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
