More on KPA1500 lcd

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

More on KPA1500 lcd

Carl Yaffey
Again, calling CQ on 6m, power around 1000. Various junk on LCD. Attaching picture assuming that’s allowed.

Carl Yaffey  K8NU

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

K9MA
I observed some weird display stuff while testing the ATU on, I believe, 10 meters. Reset didn't clear it, cycling power did. Happened a couple times.

73,
Scott K9MA

----------

Scott Ellington

 --- via iPad

> On May 31, 2018, at 10:33 AM, Carl Yaffey <[hidden email]> wrote:
>
> Again, calling CQ on 6m, power around 1000. Various junk on LCD. Attaching picture assuming that’s allowed.
>
> Carl Yaffey  K8NU
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

Carl Yaffey
OK. I’m not alone! Hi hi


> On May 31, 2018, at 11:43 AM, K9MA <[hidden email]> wrote:
>
> I observed some weird display stuff while testing the ATU on, I believe, 10 meters. Reset didn't clear it, cycling power did. Happened a couple times.
>
> 73,
> Scott K9MA
>
> ----------
>
> Scott Ellington
>
> --- via iPad
>

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

Elecraft mailing list
Question, did the pattern on the LCD "move with modulation"? RFI, bad grounding??
Mel, K6KBE 

      From: Carl Yaffey <[hidden email]>
 To: K9MA <[hidden email]>
Cc: Elecraft Reflector <[hidden email]>
 Sent: Thursday, May 31, 2018 8:48 AM
 Subject: Re: [Elecraft] More on KPA1500 lcd
   
OK. I’m not alone! Hi hi


> On May 31, 2018, at 11:43 AM, K9MA <[hidden email]> wrote:
>
> I observed some weird display stuff while testing the ATU on, I believe, 10 meters. Reset didn't clear it, cycling power did. Happened a couple times.
>
> 73,
> Scott K9MA
>
> ----------
>
> Scott Ellington
>
> --- via iPad
>

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

   
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

N2TK
In reply to this post by Carl Yaffey
Do you also see the weird stuff on the KPA1500 Utility program on the "operate" tab?
N2TK, Tony

-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of Carl Yaffey
Sent: Thursday, May 31, 2018 11:47 AM
To: K9MA <[hidden email]>
Cc: Elecraft Reflector <[hidden email]>
Subject: Re: [Elecraft] More on KPA1500 lcd

OK. I’m not alone! Hi hi


> On May 31, 2018, at 11:43 AM, K9MA <[hidden email]> wrote:
>
> I observed some weird display stuff while testing the ATU on, I believe, 10 meters. Reset didn't clear it, cycling power did. Happened a couple times.
>
> 73,
> Scott K9MA
>
> ----------
>
> Scott Ellington
>
> --- via iPad
>

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

Carl Yaffey
In reply to this post by Elecraft mailing list
The junk changes while transmitting (FT8). Pretty sure it’s RF.



> On May 31, 2018, at 11:53 AM, Mel Farrer <[hidden email]> wrote:
>
> Question, did the pattern on the LCD "move with modulation"? RFI, bad grounding??
>
> Mel, K6KBE
>
>
>

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

Carl Yaffey
In reply to this post by N2TK
I have a Mac. So, no utility program :(


> On May 31, 2018, at 12:00 PM, N2TK, Tony <[hidden email]> wrote:
>
> Do you also see the weird stuff on the KPA1500 Utility program on the "operate" tab?
> N2TK, Tony
>

Carl Yaffey  K8NU
Recording studio.
[hidden email]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: More on KPA1500 lcd

Eric Swartz - WA6HHQ, Elecraft
Administrator
The Mac/Linux versions of KPA1500 utility are being worked on right now. We hope to have them out soon.

73,

Eric
elecraft.com
_..._



> On May 31, 2018, at 8:22 PM, Carl Yaffey <[hidden email]> wrote:
>
> I have a Mac. So, no utility program :(
>
>
>> On May 31, 2018, at 12:00 PM, N2TK, Tony <[hidden email]> wrote:
>>
>> Do you also see the weird stuff on the KPA1500 Utility program on the "operate" tab?
>> N2TK, Tony
>>
>
> Carl Yaffey  K8NU
> Recording studio.
> [hidden email]
> 614 268 6353, Columbus OH
> http://www.carl-yaffey.com
> http://www.grassahol.com
> http://www.bluesswing.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]