Quantcast

P3 reverse or inverted tuning display;wrong direction, new owner

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

P3 reverse or inverted tuning display;wrong direction, new owner

Charly
This post has NOT been accepted by the mailing list yet.
How can I get the cursor line on P3 to travel up-band when I tune K3 up-band and get the cursor line to move down-band when I tune the K3 down-band.  P3 is new, and I tried the obvious with no results.
Pse help this ridiculous situation, tnx, Charly K4VUD
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: P3 reverse or inverted tuning display;wrong direction, new owner

Paul Saffren N6HZ
Hi Charly,

It sounds like what you want is to enable Fixed Tune mode.   In Fixed Tune, the spectrum is stationary and the VFO A (and/or B) cursors move up and down.  To turn on fixed tune mode, press the menu button, then using the encoder, select the menu item "FixTrack" .   Pushing the encoder in will toggle between Tracking and Fixed.   You can also map a function key to toggle between Fixed and Tracking.   Refer to the manual on how to set a function key.

Kind regards,

Paul
Paul Saffren - N6HZ
Project Manager
Elecraft Inc. 
www.elecraft.com
On 10/3/2015 3:00 PM, Charly [via Elecraft] wrote:
How can I get the cursor line on P3 to travel up-band when I tune K3 up-band and get the cursor line to move down-band when I tune the K3 down-band.  P3 is new, and I tried the obvious with no results.
Pse help this ridiculous situation, tnx, Charly K4VUD


If you reply to this email, your message will be added to the discussion below:
http://elecraft.365791.n2.nabble.com/P3-reverse-or-inverted-tuning-display-wrong-direction-new-owner-tp7608676.html
To unsubscribe from [P3], click here.
NAML

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: P3 reverse or inverted tuning display;wrong direction, new owner

oz6hq
This post has NOT been accepted by the mailing list yet.
In reply to this post by Charly
Select menu and FixTrack and set it to Tracking mode
Loading...