R: Re: K3 Display is Dated...

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

R: Re: K3 Display is Dated...

IK4EWX
Eric, is it possible for you to add on the K3 display, with a next firmware release, the VFOa-VFOb shift?

Thanks, 73
Ian IK4EWX

----Messaggio originale----
Da: [hidden email]
Data: 4-giu-2017 17.29
A: "IK4EWX"<[hidden email]>
Ogg: Re: K3 Display is Dated...

Lets close this thread now in the interest of relieving list reader overload.

Eric
Moderator etc.
elecraft.com
---
Sent from my iPhone 6S

> On Jun 4, 2017, at 4:35 AM, Drew AF2Z <[hidden email]> wrote:
>
> Not at all. Slightly large than a K3 perhaps. And requiring several separated LCD panels instead of the "one big display" design.
>
> 73,
> Drew
> AF2Z
>
>
>
>> On 06/01/17 10:39, Nr4c wrote:
>> And the front panel would be the size of a 40 inch TV.
>> Sent from my iPhone
>> ...nr4c. bill
>>> On May 31, 2017, at 10:13 PM, Drew AF2Z <[hidden email]> wrote:
>>>
>>> I would like to have a front panel that is designed according to these two rules:
>>>
>>> 1. Use physical controls only: buttons, knobs, switches. (Not a "smudge screen".)
>>>
>>> 2. The state of every control should be obvious by its position, rotation, dial, or adjacent LEDs; or, the control should be located directly adjacent to a screen area where its state is displayed.
>>>
>>> IOW, it is annoying to operate a control on one side of the panel and having to look half way across the panel to the other side to see what the state of that control is.
>>>
>>> I think if those two rules were followed you'd have a really satisfying rig to operate.
>>>
>>> 73,
>>> Drew
>>> AF2Z
>>>
>>>
>>>> On 05/30/17 17:36, ke9uw wrote:
>>>> I was wondering if the K3 display could be replaced by an updated display,
>>>> one that looks like the ones on the newest rigs from Japan. Could it be
>>>> displayed on the monitor connected to the svga on P3? Just wondering :)
>>>> -----
>>>> Chuck, KE9UW
>>>> --
>>>> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Display-is-Dated-tp7631264.html
>>>> Sent from the Elecraft mailing list archive at Nabble.com.
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[hidden email]
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to [hidden email]
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]



If you reply to this email, your message will be added to the discussion below:
http://elecraft.365791.n2.nabble.com/K3-Display-is-Dated-tp7631264p7631389.html
To start a new topic under [K3], email [hidden email]
To unsubscribe from [K3], click here.
NAML


Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: R: Re: K3 Display is Dated...

Don Wilhelm
Ian,

That is not possible without producing a new display with an icon for
that.  The display is not a programmable element.
The VFOa/VFOb is already identified with an arrow which points to the
transmit VFO - it is on the right of the display.

73,
Don W3FPR

On 6/4/2017 11:50 AM, IK4EWX wrote:
> Eric, is it possible for you to add on the K3 display, with a next firmware release, the VFOa-VFOb shift?
> Thanks, 73Ian IK4EWX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Loading...