Are you referring to the "Overload Detector" being tripped?
If so, try adding a .01 uF capacitor between the base and emitter of
Front Panel Q7.
It seems some 2N2222s are a bit more sensitive to noise on the overload
detector output line.
I know of at least 2 that were cured with this fix. Very few
transverters have this problem, but for those that do, it is an easy fix..
> Gang: having some problems with my XV50 going into overload. I'm
> looking for some ideas of how to isolate the problem.
> Wondered if anyone else has had a problem and what you did to address it.
> Not much about this in the archives.
> I have installed the bypass caps per the last builders alert.
> That didn't help this issue. Doesn't matter which mode I'm running. Still
> does it ! I am running vox when in SSB.
> Anyway, just curious if anyone has any pointers.
> Thanks and 73: Jerry N0JRN
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html >